Heatshrink
Heavy Wall Strain Relief Sleeves
AHW

Description
AHW is a non flame retardant heavy wall heatshrink sleeving designed for strain relief of heavy connectors, where flexing of cable at the cable/connector interface can lead to damage of the conductor and ultimately failure. AHW addresses this problem by dissipating the bending force over a larger radius and away from the connector/cable interface.
Features
- Shrink Ratio 2 : 1 and 3 : 1
- Operating temperature – 35 to 125°C
- High chemical resistance
- Excellent mechanical and abrasion resistance
- Colours — Black and neutral
- Minimum shrink temperature 120°C
Applications
- Mechanical strain relief at cable/connector interface
Technical Data
Properties | Test Methods | Typical Values |
Tensile (MPa) | UL 224 | > 15 |
Elongation (%) | UL 224 | > 400 |
Heat Ageing: Tensile (MPa) : Elongation (%) |
UL 224 (158°C x 168 hrs) |
> 14 > 300 |
Heat Shock (250°C x 4hrs) | UL 224 | Pass |
Low temperature Flexibility | ASTM D 2671 (4 hrs @ – 35°C) | No Cracking |
Fluid Resistance * (MPa) (%) |
ASTM D 2671 (25°C x 72 hrs) |
Tensile > 10 Elongation > 150 |
Dielectric Strength (kV/mm) | ASTM D 2671 | > 20 |
Volume Resistivity (Ω.cm) | ASTM D 257 | 1014 |
*Fluid Resistance: Tests conducted using brake fluid and unleaded petrol
Dimensions
Product | Inside Diameter (mm) | Wall Thickness (mm) | ||
Supplied | Recovered | Supplied | Recovered | |
AHW11/4 | 11 | 4 | 1 | 3 |
AHW18/6 | 18 | 6 | 1 | 3 |
AHW24/8 | 24 | 8 | 1.2 | 3 |
AHW30/10 | 30 | 10 | 1.2 | 3 |
AHW36/12 | 36 | 12 | 1.2 | 3 |
Eccentricity < 30% as per UL 224
Tolerances on size id’s and wall thickness allow 15% on above values
74 Technology Crescent, Klipriver Business Park, Klipriver
Tel: 011 868 3783 Fax: 011 868 3773
E-mail: office@airshrinksa.co.za Website: www.cip-airshrink.co.za
