Special Products
Mastic Tape
Technical Data
| Properties | Test Methods | Typical Values | ||
| AYSM | ARAM | ABFM/AGFM | ||
| Density (g/m³) | ASTM D792 | 1.3 | 1.2 | 1.3 |
| Tensile Strength (MPa) | ASTM D638 | 0.1 | 0.1 | 0.1 |
| Ultimate elongation (%) | ASTM D638 | >1000 | >1000 | > 1000 |
| Dielectric Strength (kV/mm) | IEC 250 | ≥ 15 | ≥ 10 | ≥ 15 |
| Dielectric Constant | IEC 250 | 10-15 | 3 | 2-3 |
| Volume Resistance (Ω.cm) | ASTM D527 | 109 – 1012 | 1013 | 1013 |
| 50Hz Loss Factor(tqo) | 0.035 | 0.035 | 0.035 | |
| Service Temp. (max) (°C) | -20 to +90 | -20 to +90 | -40 to +90 | |
| Adhesive & self-amalgamation | Good | Good | Good | |
Dimensions
| Product | Description | Size (mm) |
| AYSM-150 | Yellow Stress Relief | 1.5 x 25 x150 |
| AYSM-500 | Yellow Stress Relief | 1.5 x 25 x500 |
| ARAM-500 | Red Anti-Track | 1.5 x 25 x 500 |
| ARAM-1000 | Red Anti-Track | 2.5 x 30 x 1000 |
| ABFM-1200 | Black Sealing / Filler | 2.5 x 35 x 1200 |
| AGFM-1500 | Grey Sealing / Filler | 2.5 x 35 x 1500 |
NOTE: Box optional for ABFM & AGFM
Description
AYSM
Yellow stress relief void filling mastic is used on connectors and at screen cuts when doing medium voltage(MV) joints and termination installations.
Features include excellent adhesive and sealing capabilities, weather resistance, anti-aging, mildew, chemical resistance and excellent dielectric properties.
ARAM
Red anti-track mastic is used in MV termination installations to ensure a watertight seal on breakout boots, anti-track tubing and on lugs.
Features include excellent adhesive and sealing capabilities, weather resistance, anti-aging, mildew, chemical resistance and excellent dielectric properties.
ABFM & AGFM
Grey & black butyl self amalgamating sealing mastic is suitable for LV and MV applications. It is used for sealing and waterproofing of electrical installations such as joints and terminations, as well as in telekom installations.
Features include excellent adhesive, sealing, electrical and anti-aging properties and is UV resistance.
74 Technology Crescent, Klipriver Business Park, Klipriver
Tel: 011 868 3783 Fax: 011 868 3773
E-mail: office@airshrinksa.co.za Website: www.cip-airshrink.co.za
47
Special Products
Rubber Based Mastic Putty/Tape
ABFMR
Technical Data
| Properties | Test Methods | Typical Values |
| Tensile Strength (MPa) | ASTM D1000 | 0.1 |
| Ultimate elongation (%) | ASTM D1000 | ≥ 1000 |
| Dielectric Strength (kV/mm) | ASTM D1000 | ≥ 15 |
| Dielectric Constant | IEC 250 | 2-3 |
| Insulation Resistance (Ω) | ASTM D1000 | 1 x106 |
| Operating Temp. (°C) | -40 to +90 | |
| Copper Corrosion | None |
Dimensions
| Product | Description | Size (mm) |
| ABFMR-1500 | Black Void Filling Insulation Putty |
3.2 x 38 x 1500 |
Description
ABFMR self amalgamating void filling and insulation putty tape is suitable for use in various low voltage & medium voltage applications. To apply, stretch and wrap (or mould) around the application, 50% overlap is recommended for best results. The product is suitable for sealing and water proofing of electrical installations such as joints and terminations, telekom installations as well as to allow for a smoother finish when applied to an irregular shape.
Features
- Excellent self amalgamating and sealing properties
- Easy filling of irregular shapes
- Suitable for use up to 600V
- Soft and pliable
- Non corrosive with good ageing properties
Applications
- Moisture block in LV heatshrink joints
- Preventing moisture from entering MV joints and terminations
74 Technology Crescent, Klipriver Business Park, Klipriver
Tel: 011 868 3783 Fax: 011 868 3773
E-mail: office@airshrinksa.co.za Website: www.cip-airshrink.co.za